1. How to install the front car seat cover

If the front seat cushion has a hood, just put the car seat cushion down directly, and then there is a buckle at the joint of the car seat cushion, insert the buckle into the gap of the seat, so that the car seat cushion will not move forward. Then hook the two small hooks in front of the paved car seat cushion into the iron bars under the seat.

2. How to install the rear seat cushion

1. Separate the long seat and the backrest: the seat without a buckle is directly pulled out with force, and the long seat with a locking buckle is pressed down and then the long seat is pulled out. Note that some seats are fixed to the body with screws.

2. After the long seat of the car seat is separated from the backrest, pass the long seat through the bayonet on the car seat and fix the long seat. At this time, the backrest can also be put into the cap of the rear seat.

3. After the bench seat is finally installed, pay attention to the seat belt to reset. Then, insert the fixing card of the car seat cushion and the backrest into the gap, and then flatten the car seat cushion.